A heat transfer machine is an industrial device that uses heat energy to transfer patterns or text pre-printed on a carrier (such as transfer paper or ribbon) to the surface of a substrate through high temperature and pressure.
1. Connect the power cord and turn on the power switch; the power indicator light will turn on immediately.
2. Adjust the temperature controller to the desired temperature. Once the target temperature is reached, the indicator light on the controller will turn off, signaling that the machine is ready for operation.
3. Set the timer to the desired duration.
4. Lay the garment flat on the lower platen and position the heat transfer paper (ensure the correct side is facing down). Firmly press the handle down to its limit. Note: Do not apply more than 30 kg of force, as this may deform the handle.
5. When the set time elapses, a buzzer will sound; lift the handle back to its original position.
